Wednesday, 19 July 2017

Titans Return Blitzwing with Hazard and Octone with Murk


Titans Return Blitzwing with Hazard

If the design of Voyager Megatron wasn't enough to tell you what this toy is really meant to be then computer listings revealed a Voyager Octane which was released in Titans Return Wave 5 somewhere between May and July 2017 depending on where you were in the world. Essentially it's mainly a simple colour swap with the darker grey, light grey and red becoming purple, sandy beige and very dark grey respectively. He gets a new chest and face in robot mode, the jet mode is essentially the same but purple but the tank mode gets a little interesting. He has a new purple tank barrel, which the seated weapon carried over from Megatron can attach to the top of. But this gun barrel is removable, leaving just a 5mm peg behind which in turn raises the question that should Megatron's short gun barrel should also be removable? The longer tank barrel can also attach to the front of the seat weapon to form a long handgun for robot mode while the fusion cannon is gone replaced by a sword.

Sadly the problems with transforming the legs persist, even harder than I remember them being for Megatron.

So.... Is it a decent repaint of Megatron? Yes. Is it a better Voyager than the Generations T30 effort with the notoriously dodgy shoulders? Oh yes! Job done then.


Titans Return Octane with Murk

Now it's painfully obvious that Optimus Prime with Diac and his opposite number Megatron with Doomshot were due to be new versions of Octane & Blitzwing. But while Blitzwing has some serious issues with his most recent version, Octane's never been done in the Voyager scale that the rest of the Triplechangers have been done in. Astrotrain has already been remade in Titans Return as a repaint of Sentinel Prime, another use of a "pre paint" where the repaint comes out before the obvious intended version.

If the design wasn't enough to tell you what this toy is really meant to be then computer listings reveal a Voyager Octane, which was released in Titans Return Wave 5 under his Japanese name Octone.

Whereas Blitzwing is the second use of that mould after Voyager Megatron, Octone is this mould's fourth outing after Voyager Optimus Prime, Chaos on Velocitron Leader Prime and Legends Black Convoy. Fortunately there's some remoulding to help differentiate him. In robot mode Octone, like Blitzwing gets a new face and chest plate. The front of his shoulder towers are also changed, but to my mind they should be folded down for Octane anyway. Gone is the sword, replaced by a gun modelled after his original, but the double barrelled gun with seat remains. One of the remoulds for plane mode is visible in robot mode too: the straight wings with hinges in the middle are gone replaced with slanted solid one piece wings. Transforming to plane mode also reveals a more rounded jet nose. The tanker mode is largely the same, albeit recoloured, but changes to other modes have reportedly caused problems with the tanker holding together in places.

Decent repaint and remould, does the job just fine and improves the jet on previous versions.

Tuesday, 18 July 2017

Siege on Cybertron Tidal Wave


Titans Return Tidal Wave

Of the rumours coming out of the Transmissions Podcast a Titans Return version of Armada Tidal Wave from Broadside seemed one of the more likely. Both were triple changers, of a sort, with sea and flying modes involved. Aside from Micromaster Flattop there weren't many other sensible suggestions for reusing Broadside queing up.

Titans Return Tidal Wave was revealed at Toyfair 2017 with official images, albeit with a mis-transformed robot mode, released at the same time. Both sets of pictures show Tidal Wave in a colour scheme which resembles his cartoon colours, as sported on his Japanese repaint MD-06 Shockwave. Unfortunately the colours shown at toyfair and in the image release aren't quite right with the purple being too pale.

Thankfully though by the time the toy was released that had been corrected and he sported a much darker purple nearly matching his earlier toy complemented by pale grey and a clear orange for his canopy and gun pieces. The other benefit of these colours are he fits right in with the other three Titans Return Decepticon Triplechangers who also use grey and purple, making it feel as if the 85/6 toys have finally found their long lost brother. The odd sloping forward tail wings make some sort of sense this time as they now match what the wings on the original Tidal Wave did.

I like my Tidal Wave, they've done a smashing job on the colours, far better than the toyfair showroom and official images show him. Yes, for the character, he could be bigger, but for my money he's better than Broadside.

Tidal Wave forms part of the Siege on Cybertron boxset, also known as the Strength set, which is a BBTS exclusive in the USA. The boxset also contains Magnus Prime, a repaint of Legends Ginrai, Metalhawk, a Triggerhappy repaint, and new toys Pounce & Titanmaster Thunderwing.

100_3849

100_3848 100_3843

100_3864

100_3865 100_3866 100_3868


Future Repaints

Tidal Wave's colours are close to his Micron Legend version but that still leaves his Armada or Energon versions as possible repaints.

I've always thought that an ideal repaint of the original Broadside would be Micromaster Flattop and the same applies to his Titans Return version.

Titans Return Cloudraker & Wingspan


Titan Return Cloudraker

It came as something of a surprise when Cloudraker & Wingspan were shown as a 2 pack at a Taiwanese toy exhibition, later revealed to be a Walgreens exclusive in the USA. The expectation was that Cloudraker and Wingspan would follow in the "Intelligence" and "Fireblast" boxsets expected to follow Chaos on Velocitron ("Speed"), which has Fastlane/Fastclash, and Siege on Cybertron ("Strength"), which has Pounce. Nobody knows for sure why the plans have changed, and the picture may be slightly clearer in a few days times post SDCC 2017, but my guess is that the last two boxsets were cancelled based on the sales of the Combiner Wars sets. We know, from rumours leaked to the Transmissions Podcast that the Strength and Speed sets were in development early 2016 at around the point the first sets hit. My guess is that the sales numbers on the first sets caused Hasbro to pull the plug before any serious work was done on the last two Titans Returns sets, reduce the numbers on the last Combiner Wars and first two Titans Return sets and make them exclusives. Left with two new Clones unused they bundle these in a box together. Now Clones fans are happy with this decision, as they don't have to buy the rest of two more boxsets to get the toys they want!

From the front Cloudraker looks almost exactly like his brother Fastclash, which is exactly the look he should have. He feels slightly less bulky having lost the prominent spoiler behind his head and the wheels on his back and lower legs, all of which went into Fastclash's vehicle mode, which are replaced by a small fin, the jet nose and the folded up wing panels respectively. The lower legs and shoulder joints are different between the two toys but otherwise all the robot parts are the same leading to identical articulation. The transformation however is rather different.....

Start by rotating his head 180° so the fin faces forward. Then fold his hands into his forearms, straighten the arms and raise them so the point straight up before folding the shoulders in 90° so they're over the front of the chest. Split the inner part of the waist in two and fold 90° out to the sides: this joint was present on both Fastlane and Pounce but not used by either toy. Unfold the black wings from behind the lower legs, so they're pointing down, and fold the feet back into the lower legs. Fold the legs back a further 90° at the hips and connect the slots on the lower legs to the tabs on the sides of the shoulder. Unfold the jet nose from the back of the robot so it snaps into place under the waist, pointing down where the legs were. fold down the landing gear and stand.

The centre of the jet mode looks a bit boxy and square, but Cloudraker always did, and this is more than offset by the wings to the sides and the nose to the front. The tail fin, on the back of the robot's head, is all but hidden away sitting in between the folded back arms which we must assume are engines of some sort. Under the nose is a fold down landing gear and a hole for a flight stand. There's two similar holes further back under the toy that are also present on Fastclash: Then I thought they might be used here but now I suppose they too must be intended as flight stands. Since the toys share the same body and chest piece, Cloudraker also has the ability to carry a Titanmaster in vehicle mode: the seat folds back between the arms/jet engines.

There's only one slight criticism I can offer: the folded back legs seem to pop off their securing tabs in jet mode a bit to easily. Perhaps slightly deeper tabs were needed. But apart from that, and the lack of guns common to the Titans Return Clone, he's a fine toy far better than his brother Fastclash.


Titan Return Wingspan

Wingspan's changes from Pounce are very similar to Cloudraker's from Fastclash: new lower legs & shoulder joints and replacement alt mode parts. But that doesn't quite do justice to the changes nor does it reflect how much the design has been updated from the original toy. The robots modes look the same again and have identical articulation, including that odd bicep swivel rendered necessary by the ball joined elbow. The transformation is different to both Pounce and his original and that's where the changes come through:

Rotate the head 180° and fold the new beast head up off his back. Straighten the arms, fold the arms in over the chest at the shoulder and then rotate the lower arms in 90° so the new claws under the forearms are on the front of the chest. Swing each leg 90° out to the side at the thigh swivel so the inner leg faces forward. Just like Cloudraker separate the inner waist and fold each half, and leg, 90° out to the side. Fold each leg up 90° at the hip and down 90° at the knee so the front of the knee is level with the top of the robot's shoulder and a tab on the rear of the shoulder fits into a slot in the near. Unfold the wings from the robot's leg and stand on the beast claws.

Even before we saw Wingspan we knew there was something going with his arms thanks to the empty pin holes through Pounce's arms and we now find those holes holding the beast's claws in place with the legs becoming the wings. On the previous Wingspan the robot legs became the beast legs, the wings were pegged on his back and easily lost while the arms just sat there at the side of the body. This new version uses the robot parts better I think albeit at the cost of slightly bulkier less articulated wings. To make up to this you've got some options with the the best legs which lets you stand the bird either so he's parallel with the ground or, by bending robot elbows & shoulders, at 45° angle. A new tail completes the look, attached at the base of the robot's back which still has the seat for the Titanmaster which Pounce had.

Easily the most changed of the four clones, justifying the decision to include the split waist on Pounce which I really couldn't see the point of beyond possible parts sharing with Cloudraker. But it's a great update and I'm glad to have all four in my collection especially when the first have proved hard to get! I'm grateful for the final two being bundled together a a cheap price, which has probably saved me in the region of £220, but do wish they'd managed to make these in their traditional Fastlane & Cloudraker/Pounce & Wingspan combinations and had bundled some weapons with them. I await the Takara versions now to see what changes they make....

100_4013 100_4014

100_4015

100_4017 100_4016

100_4018

100_4019 100_4020

Saturday, 8 July 2017

Legends Black Convoy


Legends Black Convoy

Evil Black Optimus Prime repaints aren't as obligatory as they once were but when your Optimus is modelled after the Laser Rod Optimus Prime design used for Car Robots Black Convoy/Robots in Disguise Scourge it would be rude not to. The only reasons I can think that it hasn't showed up in Titans Return is the mold has been used three times there (Voyager Optimus Prime, his Chaos on Velocitron Laser Prime repaint and also as the Octone remould) and that his western name Scourge has been used on it's original character. As I've said many times previously I think the Scourge name was wrongly used back in 2001 and that he should have been Mega Octane, a name with more fuel related connotations and linking to his alt mode.

You know that the robot mode is going to lend itself to being Black Convoy by virtue of the design and the black, accompanied by grey for the upper legs & elbows and some silver & blue highlights, looks fab. The look is completed by the sword being cat in clear pink. The tanker mode looks good, with the unadorned trailer sides painted silver. The silver trailer then helps the jet giving it a plain body, as opposed to the heavily stickered previous versions, which coupled with the black nose gives the plane probably it's best version yet.

As a bonus, Takara have created a base mode for this toy: The legs are stretched out to the sides with the body forming a tower, with the arms linked together round the gun, and the wings folded forward to form a platform. Far better than several of the official Titans Return bases!

Top repaint, glad to have got one.

For pictures, including comparisons with previous versions, see Alfes Blog 2803 & 2804

Tuesday, 20 June 2017

Siege on Cybertron Metalhawk


Siege on Cybertron Metalhawk

Probably the biggest surprise of Toyfair 2017 was the reveal of the deluxe repaint in the Strength Boxset. Leaks publicised by the Transmissions Podcast had indicated a deluxe figure called "Iron Apex", a new version of Apex Bomber/God Bomber would be included. A new version of Metalhawk from the then unrepainted Triggerhappy was came rather left field....

Exclusive to Japan Pretender Metalhawk gained fame not just for not being released in the west but also for incorporating die cast metal in it's design. A popular character in the Japanese cartoons his one transformable re-release is as a Botcon Exclusive Remould of Generations Thunderwing.

It isn't that drastic a repaint actually: all the blue stays blue except for the chest and it's side pieces which become a bronzey gold. The grey all stays grey too, maybe changing in shade a bit, except for the shoulders and guns, which become red although the shoulders are then painted blue which is really annoying as the blue wings are also painted but this time to red. Clear red replaces clear blue in the cockpit canopy and a new face modelled after his original version's inner robot face is also included.

The jet looks completely different, the robot looks different albeit with the colours in the right places but somehow this really works for me. Getting the robot colours right is a big plus in helping that and from there it's easy to see the vehicle as a Cybertronian version of Metalhawk.

Now can we have a reissue of the original please?

Monday, 19 June 2017

Siege on Cybertron Pounce


Seige of Cybertron Pounce

I'll freely admit I was looking forward to Pounce, a toy I loved the original incarnation of. Straight out the box it's obvious they've done a decent job updating it. A lot of the purple has gone, replaced by white on the front legs and lower rear legs. The only purple that's left is more cerise now and is paint covering a new panel, moulded in blue, covering the back of the robot's upper legs in beast mode, with the tail, now blue, hanging off that. Behind the head is a moulded depression for a Titanmaster to sit in. The beast articulation has been significantly improved with the front legs jointed at shoulder & knee while the rear legs bend at hip & knee. The only thing he's really missing are the holes to mount weapons on the shoulders but since he doesn't have any weapons that point is a bit moot.

Transformation: fold the beast head back. Rotate the robot head 180°: it needs to be reversed and facing straight for the beast head to fit snugly over it. Fold the front lower leg forward onto the front of the upper leg which is then folded back 90°. Fold the compacted legs up 90° onto the beast's back beside the head which in turn swings the robot's arms out from under the beast. Fold the blue tail end back onto the cerise tail base. Straighten the rear legs. Fold the rear lower legs into the rear upper legs and straighten to form the robot legs. Rotate each leg 180° at the thigh. Stand.

I find the robot mode here very interesting: he's exactly the same size as Fastclash and there's plenty of evidence that one is a retool of the other but I'm struggling to find many parts that are identical. The chest has a lot of detail in common but they're distinctly different piece: Fastclash features a fold up chest panel which becomes a seat for a Titanmaster with a slot for the Titanmaster's heel spur on the waist. Here the chest is a solid unit with a Decepticon symbol at waist level. The legs and arms are completely different while the shoulder joints, which fulfil a similar function on both toys by swinging in across the chest, are almost identical bar the detailing on the front. The only parts that are definitively the same are the ball joints in side the hips which stretch up into the waist causing the waist to split in two in a manner not used by either transformation!

Basic articulation is identical to Fastclash: ball joints at elbow, shoulder and hip, thigh swivel, bending knee and rotating head. Design is fab, looks just like the original but, like Fastclash, I'm missing the guns.

I loved the original Decepticon Clones and I'm liking this new one a lot too. Give me his brother Wingspan now!

Saturday, 17 June 2017

Siege on Cybertron Magnus Prime


Siege on Cybertron Magnus Prime

The first hint of this toy came via the Transmissions Podcast who in Episode 157 on March 3rd, 2016 said
Leader "Powermaster Prime" has a blue repaint. Called Magnus Prime/Super Ginrai.
Now when I heard this my immediate thought was that somehow the telling had go a little garbled here and we'd get a Diaclone Powered Convoy repaint of Combiner Wars leader Ultra Magnus: These colours had been reused in Transformers as Movie Preview Ultra Magnus and more recently as Masterpiece Delta Magnus. But I could live with owning a blue Powermaster Optimus Prime, it would hit the idea of the Blue Cab Prime being Delta Magnus. Then in the meantime E-Hobby announced plans for their Classics Voyager Delta Magnus. Had the two toys been mixed up in what Transmissions were told? Or did the E-Hobby toy force Hasbro to change their plans? We shall never know, but if you're reading Hasbro there's still room for a Delta Magnus repaint of CW Ultra Magnus in my collection.

So when Delta Magnus was revealed at Toyfair 2017 as a slightly modified deco of Takara's Legends Super LG-35 Super Ginrai, there was a mixed reaction. The Magnus name was a problem for many people as they didn't feel it matched the toy at all. Those who already had it wanted either Delta Magnus or the rumoured blue Powermaster Prime. But those who hadn't bought Super Ginrai were pleased because it gave them an opportunity to get a Powermaster Prime that looked more like Powermaster Prime than the Titans Return version did. The inclusion of the Japanese version also made people wonder if Godbomber was coming to the west, possibly in the Firepower boxset which would seem an appropriate home for him.

The version shown at Toyfair had a metallic painted trailer but his Official Images show something more grey. In the end the release of the toy ended up looking a lot like super Ginrai than many people expected, as you can see in This Comparison Gallery.

The waist, was white now is blue. The Autobot symbols on the truck mode are larger. The shades of red and blue are slightly different. The guns are now black. None of these I particularly have a problem with, in fact, if pushed, I think I even prefer the Delta Magnus colours. The problem is the Titanmaster. Super Ginrai's Titanmaster is a dead ringer for Powermaster Optimus Prime's Powermaster Hi-Q. This isn't. Along with the super robot's waist, the Powermaster's lower & upper legs and face are now blue. Since these parts, and the waist, were grey on Titans Return Powermaster Optimus Prime I think we can conclude that they're moulded on the same sprue. It's a shame, it was so good on the Japanese version.

Many people have complained of problems with Super Ginrai's ankles not holding the toy up. I didn't have that issue till I put Godbomber on him. However my Delta Magnus falls over backwards if I look at him funny or knock what he's standing on. I can't see I'm doing anything different, he just doesn't stand as well!

It looks a more than adequate substitute for Super Ginrai in every department bar the Titanmaster but the ankles scare me, especially if I was intending to put Godbomber on him.